The installation method of glass turnover vehicles mainly involves the combination of glass suction cups and cranes, as well as the use of telescopic arm forks to load vehicles with glass suction disc heads. These methods are applicable to different installation scenarios, ensuring safe and efficient handling and installation of glass.
Using a combination of glass suction cups and cranes:
This method is commonly used in glass installation sites without eaves and belongs to vertical operations. It uses glass suction cups to adsorb glass, and then lifts and moves it through a crane. It is suitable for operations between floors in shopping malls and train stations, and can lift about 4 meters to install glass, with a load capacity of up to 800kg.
For larger glass installation requirements, such as lifting curtain wall glass up to 27 meters with a load capacity of 1.2 tons, a 1.2-ton glass suction cup truck improved from a high-altitude truck is used. The front is equipped with 8 glass suction disc heads, and the rear is connected to a 27 meter high empty truck, ensuring safe and efficient operation.
Using a telescopic arm forklift with a glass suction head:
The telescopic arm forklift can lift a load of 5 tons, and with the addition of a suction head, it can also suck up more than 2 tons of curtain wall glass. The 360 ° rotation and long arm extension function of this device make it more flexible in large glass installation, and can easily cope with various installation challenges, including the installation of curved glass.
